| Cable Cross-section (only for reference, not to scale) |
| Cable Description |
Loose tube construction, tubes jelly filled, elements (tubes and fillers when necessary) laid up around metallic central strength member, polyester yarns used to bind the cable core, filling compound filled in the apertures of the cable core, two ripcords, steel tape armored, then PE outer sheath.
| Fiber & Tube Color |
Fiber color code.
|
No. |
1 |
2 |
3 |
4 |
5 |
6 |
|
Color |
Blue |
Orange |
Green |
Brown |
Gray |
White |
|
No. |
7 |
8 |
9 |
10 |
11 |
12 |
|
Color |
Red |
Black |
Yellow |
Violet |
Pink |
Aqua |
Loose tubes color code.
|
No. |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
|
Color |
Blue |
Orange |
Green |
Brown |
Gray |
White |
Red |
Black |
| Structure Parameter |
|
Item |
Contents |
Unit |
Value |
|||
|
Fiber count |
Number |
/ |
12 |
24 |
48 |
96 |
|
Cable structure |
/ |
/ |
1+5 |
1+5 |
1+5 |
1+8 |
|
Fiber No. per tube |
Number |
/ |
12 |
|||
|
Loose tube |
Number |
/ |
1 |
2 |
4 |
8 |
|
Central strength member |
Material |
/ |
Steel wire with cushion when necessary |
|||
|
Outer sheath |
Nominal thickness |
mm |
1.6 |
1.6 |
1.6 |
1.7 |
|
Cable diameter |
±5% |
mm |
9.6 |
9.6 |
9.6 |
11.9 |
|
Cable weight |
±10% |
kg/km |
93 |
94 |
98 |
146 |
|
Max. tensile load |
Short term |
N |
1500 |
1500 |
1500 |
3000 |
|
Breaking force |
/ |
N |
3000 |
3000 |
3000 |
4000 |
Note: Sheath thickness not consider ripcord portion, sizes and values without tolerances are nominal values.
| Mechanical & Environmental Performance |
|
Item |
Contents |
Value |
|
Max. crush resistance |
Short term |
1500 N/100mm |
|
Min. bending radius |
Installation |
20 x cable diameter |
|
Operation |
15 x cable diameter |
|
|
Temperature range |
Operation |
-40℃ ~ +60℃ |
|
Installation |
-10℃ ~ +60℃ |
|
|
Storage/transportation |
-40℃ ~ +60℃ |
| Main Mechanical & Environment Performance Test |
|
Item |
Test Method |
Acceptance Condition |
|
Tensile Strength IEC 60794-1-21-E1 |
– Load: Short term tension – Length of cable: ≥ 50m – Load time: 1min |
– Fiber strain £ 0.6% – Loss change £ 0.1dB@1550nm after test. – No fiber break and no sheath damage. |
|
Crush Test IEC 60794-1-21-E3 |
– Load: Short term crush – Load time: 1min |
– Loss change £ 0.1dB@1550nm after test. – No fiber break and no sheath damage. |
|
Impact Test IEC 60794-1-21-E4 |
– Points of impact: 3 – Times of per point: 1 – Impact energy: 4.5J |
– Loss change £ 0.1dB@1550nm after test. – No fiber break and no sheath damage. |
|
Repeated Bending IEC 60794-1-21-E6 |
– Bending radius: 20 x OD – No. of cycle: 25 |
– Loss change £ 0.1dB@1550nm after test. – No fiber break and no sheath damage. |
|
Torsion IEC 60794-1-21-E7 |
– Length: 1m – Twist angle: ±90° – No. of cycle: 10 |
– Loss change £ 0.1dB@1550nm after test. – No fiber break and no sheath damage. |
|
Water Penetration IEC 60794-1-22-F5 |
– Height of water: 1m – Sample length: 3m – Time: 24h |
– No water leak from the cable core of the opposite end. |
|
Temperature Cycling IEC 60794-1-22-F1 |
– Temperature: -40℃~+60℃ – Time of each step: 12h – Number of cycles: 2 |
– Loss change £ 0.1dB/km @1550nm. – No fiber break and no sheath damage. |
Remark: “No attenuation changes” is considered as the attenuation changes ≤ 0.05 dB.
| Optical Fible |
|
Item |
Contents |
Value |
|
G.652D Optical characteristics |
||
|
Attenuation |
@1310nm |
≤0.36dB/km |
|
@1550nm |
≤0.22dB/km |
|
|
Dispersion |
@1288nm～1339nm |
≤3.5ps/(nm·km) |
|
@1550nm |
≤18ps/(nm·km) |
|
|
Zero-Dispersion wavelength |
1300nm～1324nm |
|
|
Zero-Dispersion slope |
≤0.092ps/(nm2·km) |
|
|
Mode field diameter (MFD) |
@1310nm |
9.2±0.4μm |
|
@1550nm |
10.4±0.5μm |
|
|
Cable cutoff wavelength λcc(nm) |
≤1260nm |
|
|
Micro bending Attenuation |
@1550nm (100turns; Φ60mm) |
≤0.05dB |
|
Link polarization dispersion (PMDQ) |
≤0.1ps/km1/2 |
|
| Product Dispaly |
For reference only, the actual product shall prevail
